lDimensions

lWiring diagrams

PH2-425-2/40U
1*Lamp Type: GPH1148T5 GPH1554T5 GPH1630T5 TUV64T5 G64T5
Wiring Diag ：A
2*Lamp Types：GPH793T5 GPH843T5 TUV36T5 TUVPL-L36W G36T5
Wiring Diag ：B

PH2-800-2/75U
1*Lamp Types：GPH1554T5HO GHO64T5 TUV64T5HO TUVPL-L95WHO TL100W
Wiring Diag：A
2*Lamp Types：GH436T5HO GPH846T5HO GPH893T5HO GHO36T5 TUV36T5HO TUV55WHO TUV75WHO TUVPL-L35WHO TUVPL-L60WHO
Wiring Diag：B

Technical Specifications
Mains Voltage：110-240VAC±10%
Mains Frequency:50/60Hz
Power Factor: >0.98
Efficiency: >92%
Operating Frequency: 40-60KHz
Dimensions: 200*64*29mm

Installation Requirement
Wire Gauge：0.5-1.0mm²
Max.cable length between ballasts and lamp：5m
LED specification： VF=1.8-3.6V IF =5-20mA(When it's necessary,series current limiting resistor is needed.)
Relay specification： Mains Voltage 5VDC±10% Mains Current 45mA±10%；
Max.start Voltage ≤3.75VDC Coil Resistance≥100Ω

Mounting Restrictions
Disconnect Input Power Before Installing or Servicing.
Ballast Case Must Be Grounded.
Don’t short any two wires of the four outputs.

Features Starting：Preheat
Lamp status indication via DC signal output(Connected LED Requirement).
DC 5V±5% （5mA）：lamp on.
DC 0V：lamp fault or on lamp.

Applications
All areas of applications include UV lamps.
Air purification
Industrial water treatment
Kitchen purification.